Download Samsung T23C350MO User Manual

Other Information
Issues
Solutions and Explanations
The product won’t turn on.
Make sure the AC power cord is securely plugged in to the wall outlet and the
product.
Make sure the wall outlet is working.
Try pressing the P button on the product to make sure the problem is not the remote.
If the product turns on, refer to “Remote control does not work” below.
There is no picture/video.
Check the cable connections. Remove and reconnect all cables connected to the
product and external devices.
Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to
match the product's input connections. For example, if an external device’s output is
HDMI, it should be connected to an HDMI input on the product.
Make sure your connected devices are powered on.
Be sure to select the correct input source.
Reboot the connected device by unplugging it, and then reconnecting the device’s
power cable.
The remote control does not
work.
Replace the remote control batteries. Make sure the batteries are installed with their
poles (+/–) in the correct direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the product from 5~6 feet away.
The Cable/set top box remote Programme the Cable/Set remote control to operate the product. Refer to the Setcontrol doesn’t turn the
Top-Box user manual for the SAMSUNG product code.
product on or off, or adjust
the volume.
Anynet+ (HDMI-CEC)
Anynet+ does not work.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
You can connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
English - 56