1
Download SigmaPlot® 8.0 User's Guide
Transcript
Working with 2D Graphs Customizing Error Bar Directions Control the error bar direction used for each data point by entering error bar directions into a worksheet column. Figure 6–27 Error Bars Using Custom Directions from Worksheet Columns To use custom error bar directions: 1. Select the first cell in an empty worksheet column. 2. Enter the codes for the error bar directions. The codes for the directions are: Direction Code Absolute Positive Positive or P Absolute Negative Negative or N Relative From Zero From Zero or F Relative To Zero To Zero or T Absolute or Relative, Both Directions Both, PN or FT Σ Codes you type in the worksheet can be either upper or lower case. 3. Double-click the plot. Modifying Error Bars 257
