Download A Methodology for Troubleshooting Inter
Transcript
Verify knowledge of active source • If we are getting an SA from what we think should be the RPF peer, yet rejecting it, we need to work through the MSDP peer-RPF rules to figure out why. Possible reasons: – We've configured to use only the multicast RIB, yet we have no MBGP route to the originating RP. Check that the source network is advertising the route to the RP in MBGP and we are accepting it (policy misconfigurations). – We have MBGP running, but not MSDP, with a peer that appears to have a better route to the originating RP than who we think is the RPF peer. – incorrectly configured default peer. – bugs, voodoo, who knows! Engineering Workshops 1