Download BST Safety Oriented Brake Module / Operating Instructions / 2008-04

Installation
Mechanical Installation
7
Installation
7.1
Mechanical Installation
7.1.1
DIN rail mounting
7
The BST module is mounted onto a DIN rail in the control cabinet.
137090187
•
Leave 40 mm clearance at the top, 60 mm at the bottom and 15 mm at the sides for
optimum cooling. Make sure air circulation in the clearance is not impaired by cables
or other installation equipment.
•
Ensure unobstructed cooling air supply and make sure that air heated by other units
cannot be drawn in or reused.
•
Install the units vertically only. You must not install them horizontally, tilted or upside
down.
40
Minimum clearance and mounting
position
15
60
15
137088523
Operating Instructions – Safety-Oriented BST Brake Module
21