Download USER'S MANUAL

Remote Sensor
1 – LED Control Light
Flashes once when the remote unit transmits a reading
upon start up or the TX button is pressed.
2 – LCD Display
LCD displays the temperature, humidity, channel
number, low battery status.
3 – TX Button
Press TX button to transmit a reading, the LED flashes
once before the battery cover is closed.
4 – Channel Selector
Channel is to be selected before batteries are installed.
5 – Wall Mount Hole
For mounting the sensor on a wall.
6 – °C/°F Switch
Selects between Celsius (°C) and Fahrenheit (°F)
7 – Battery Compartment
Requires 2 x AAA alkaline batteries
(not included).
8 – Table Stand
Stands the remote unit on a flat surface.
6