1
Download ROX™ - Web Interface User Guide
Transcript
35. Static Routing
35. Static Routing
Figure 35.1. Static Menu
The Static menu is accessible from the main menu under routing. The path to this menu is routing/static.
Figure 35.2. Static Route table
The path to the Static Route table is routing/static/ipv4.
Figure 35.3. Static Route form
The path to the Static Route form is routing/static/ipv4/{route}.
hw-accelerate
If the static unicast route can be hardware accelerated, the option will be available. For a static
unicast route to be accelerated, the ingress and egress interfaces must be switched.
The Hw-accelerate field will only be visible in the form if the device has a layer 3 switch.
Figure 35.4. Static Route Using Gateway table
The path to the Static Route Using Gateway table is routing/static/ipv4/{route}/via.
Figure 35.5. Static Route Using Gateway form
ROX™ v2.2 User Guide
420
RuggedBackbone™ RX1500
