1
Download FmX Integrated Display User Guide
Transcript
VRS Plugin for DCM-300 and Ag3000 Modems 19 Configuring the DCM-300 modem 1. Install the VRS plugin. For more information, see Adding or removing a plugin, page 192). 2. To use VRS corrections the GPS Setup tab must be configured with a Correction type of Trimble VRS. Note – The FmX display must be unlocked for RTK to use the Trimble VRS correction type. 3. From the Configuration screen, select the VRS plugin and then tap Setup. The VRS Configuration screen appears: 4. From the Device drop-down list, select the type of modem that is connected. The default is DCM-300. FmX Integrated Display User Guide 447
