Download USER MANUAL

Backup and Firmware
Router firmware backup, upgrade and settings reset to their factory defaults.
Backup and reset configuration
Backup archive – download current router settings file to personal computer.
Reset to defaults – reset router settings to their default values.
Troubleshoot package
Logging information and configuration– download troubleshoot package to provide to device support team when
facing a problem.
Restore configuration
Restore backup – upload and restore router settings file from personal computer.
Firmware upgrade
Keep settings – when check box is selected router will keep saved user configuration settings after firmware upgrade.
When check box is not selected all router settings will be restored to factory defaults after firmware upgrade.
Image – router firmware upgrade file.
Firmware upgrade – Verify
Compare firmware file checksum to ensure data integrity. If checksum is correct click “Proceed” button below. Wait
until upgrade process completes.
Important notes:

Leaving “Keep settings” check box unselected before upgrade process will change IP address of
router to default value 192.168.1.1 and you may need to configure router again (please read
chapter “Logging in” at page 9)
Warning: Do not ever remove router power supply and do not press reset button during upgrade process! This will
totally damage your router and it won’t be accessible. If you have any problems related to firmware upgrade you should
always consult with local dealer.
Reboot
Reboot router by pressing button “Reboot”.
Logout
Log out from router management WEB interface.
64