Download User Manual

3. Operation Instructions 8. Technical Specifications ‐The moving head is an LED wash light for onsite decoration z
36PCS 10W RGBW high power LEDs purpose. z
50,000 hours lifespan and low power consumption ‐Don’t turn on the fixture if it’s been through severe temperature z
8 bit smooth and 16 Bit precise resolution for PAN/TILT movement difference like after transportation because it might damage the light z
540°/630° pan and 265° tilt movement due to the environment changes. So make sure to operate the fixture z
Scan position memory, auto reposition after unexpected movement until it is in normal temperature. z
RGB color mixing system ‐This light should be keep away from strong shaking during any z
LED shutter transportation or movement. z
LED dimming ‐Don’t pull up the light by only the head, or it might cause damages z
LED rainbow effect to the mechanical parts. z
Macros effect ‐Don’t expose the fixture in overheat, moisture or environment with z
Strobe effect with 18 flashes per second and pulse effect too much dust when installing it. And don’t lay any power cables z
General dimming and blackout for all four colors on the floor. Or it might cause electronic shock to the people. z
14 DMX channels ‐Make sure the installation place is in good safety condition before z
DMX512, master‐slave and sound activated controllable or auto operation installing the fixture. z
Blue background LCD display ‐Make sure to put the safety chain and check whether the screws are z
Input Voltage: AC90‐260V 50‐60Hz screwed properly when installing the fixture. z
LED Quantities: 36pcs 10W 4 in 1 RGBW LEDs ‐Make sure the lens are in good condition. It’s recommended to z
Control Signal: DMX512, master‐slave and sound activated or auto operation replace the units if there are any damages or severe scratch. z
Control Channel: 14 DMX Channels ‐Make sure the fixture is operated by qualified personnel who knows z
Power Consumption: 360W/ 380W(max) the fixture before using. z
Dimensions: 350x260x350mm ‐Keep the original packages if any second shipment is needed. z
Packing Dimensions: 395x320x460mm ‐Don’t try to change the fixtures without any instruction by the z
Net Weight: 9kgs manufacturer or the appointed repairing agencies. z
Gross Weight: 11kgs ‐It is not in warranty range if there are any malfunctions from not following the user manual to operate or any illegal operation, like shock short circuit, electronic shock, lamp broke, etc.