Download SERVICE STATION MANUAL

Transcript
MP3 LT 400 i.e.
Braking system
Specific tooling
020329Y Mity-Vac vacuum-operated pump
Locking torques (N*m)
Oil bleed screw 8 ÷ 12
Brake pipes
Front brake pipes removal
Unscrew the braking splitter screw.
Disconnect the brake pipes removing the two metallic straps indicated in the figure.
Remove the brake oil tube fitting from the rigid pipe
inside the front suspension arm and loosen the
hydraulic joint fixing nut of the suspension locking
to release the brake pipes.
Front brake pipes removal
Remove legshield.
Remove front wheel and mudguard.
Disconnect the brake pipes from the calliper and
drain the brake fluid.
Then, remove the plastic and metallic straps.
Unscrew the brake pump pipes as indicated in the
figure.
BRAK SYS - 315