Download POLY Operating-/Assembly Instructions KTR

KTR Kupplungstechnik
GmbH
D-48407 Rheine
POLY
Operating-/Assembly Instructions
KTR-N
sheet:
edition:
49610 EN
2 of 24
9
The POLY is a torsionally elastic claw coupling. It is able to compensate offset of shafts, e. g.
caused by manufacturing inaccuracies, thermal expansion etc., in case of low shaft distance
dimension.
Table of Contents
1
Technical Data
2
Hints
2.1
2.2
2.3
2.4
2.5
Coupling Selection
General Hints
Safety and Advice Hints
General Hints to Danger
Proper Use
3
Storage
4
Assembly
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
5
Components of the Couplings
Assembly of the Coupling (General)
Assembly of the Type PKZ
Assembly of the Type PKD
Assembly of the Type PKA
Hint Regarding the Finish Bore
Displacements - Alignment of the Couplings
Spares Inventory, Customer Service Addresses
Enclosure A
Hints and Instructions Regarding the Use in
5.1 Use in
Hazardous Areas
Hazardous Areas According to the Regulations
5.2 Control Intervals for Couplings in
5.3 Approximate Values of Wear
5.4 Permissible Coupling Materials in the
Hazardous Areas
Hazardous Area
5.5
Marking of Coupling for the Hazardous Area
5.6 Starting
5.7 Breakdowns, Causes and Elimination
5.8 EC Certificate of Conformity according to the EC Standards 94/9/EC
dated 23 March 1994
Schutzvermerk
ISO 16016 beachten.
Gezeichnet:
Geprüft:
11.03.10 Pz/Bru
16.03.10 Pz
Ersatz für:
Ersetzt durch:
KTR-N vom 25.04.07