Download FULL D1 DVR User Manual

CONNECTION AND SETUP
2.6 Clear Hard Disk
It’s recommended to clear all data in the hard disk for the first time to user this DVR to ensure the recorded data
are not mixed with other data previously saved in the same hard disk.
(SYSTEM)  “SYSTEM INFO”  “CLEAR HDD”. The DVR
Right-click to show the main menu, and select
will reboot when hard disk data are cleared.
SYSTEM
ACCOUNT
TOOLS
SYSTEM INFO
BACKUP DATA (USB)
BACKUP LOG (USB)
BAUD RATE
HOST ID
R.E.T.R
AUTO KEY LOCK(S)
CLEAR HDD
RESET DEFAULT
REMOTE CONTROL ID
2400
000
5
NEVER
HDD-0
SUBMIT
000
SERIAL TYPE
VIDEO FORMAT
VERSION




RS485
NTSC
1019-1008-1010-1010
EXIT
2.7 Password Setting
Right-click to show the main menu, and select
(SYSTEM)  “ACCOUNT” to change the default password of
SUPERVISOR.
There are four user levels for different access privileges: SUPERVISOR, POWER USER, NORMAL & GUEST.
For details, please refer to “4.2 User Level Creation” at page 13.
SYSTEM
ACCOUNT
TOOLS
SYSTEM INFO
BACKUP DATA (USB)
BACKUP LOG (USB)
USER LIST
USER NAME
admin
power
normal
guest
EXIT
ADD
LEVEL
SUPERVISOR
POWER USER
NORMAL
GUEST
EDIT
DEL
10