Download Stratomaster EFIS Quick User Guide v1 © 2010 www.sparxfly.co.nz

Stratomaster EFIS Quick User Guide
Function keys select
HSI/GSI Nav source and
engage Autopilot
Ground speed and
wind vector
Airspeed tape and Heading tape and
TAS
turn coordinator
v1 © 2010 www.sparxfly.co.nz
Altitude tape,
AGL and VSI
Keys 1-9 select
screens
+ - keys zoom
map & terrain
screens
0 key lists nearest
airfields
UP DOWN
keys set QNH
Double-click rotary knobs
to select function & click to
save.
Rotate to set, press & rotate
for fast set.
ACK key clears
pop-up alarms
LEFT RIGHT keys select
info page content
SHIFT key selects alternate
functions on keypad
Stratomaster EFIS Quick User Guide v1 © 2010 www.sparxfly.co.nz
Select and activate
GOTO navigation
(airfields, waypoints,
navaids)
Select & activate
active/standby GVOR
navigation
Goto AIRFIELD
Current AIRSPACE
information
Select & activate
ROUTE navigation
Goto WAYPOINT
Follow ROUTE
Follow HDG/ALT BUGs
Set HDG & ALT
BUGs with rotary
knob
Select field
F3 Set HSI to
heading bug
GPS status
M OVING M AP
viewing options
Zero/restore AH
pitch display
Pop-up CHECKLIST
select & cancel
Select waypoint
Select route
F4 Set GSI to
altitude bug
or select runway
for GLS approach
HITS and HSI/GSI now active
Yellow- hdg bug, goto Blue- route, waypoint
Double Blue- GLS
SHIFT key functions
Press SHIFT then
appropriate key
AP servo power ON
F7 Autopilot
Engage AP at current altitude
Or
Engage AP at ALT BUG altitude
Override with stick
HSI/GSI
LEFT RIGHT
keys rotate
info page
Simple HSI &
fuel planning
Select
-VHF-
Select
-VHF-
Select Select
-NAV- -NAV-
Select
-BARO-
Select
-VHF-
Select
-VHF-
Select Select
-NAV- -NAV-
Select Select
-BARO- -HEAD -
Active
Active
General info
Terrain
+ - keys set scale
AUTOPILOT now active
To disengage:
or AP servo power OFF or
Standby
Standby
Active
Active
For connected
SL30/40 radios
Standby
Standby
Set
QNH
Select
-HEAD - -OBS000
Set HDG
BUG
Select
-OBS-
F7 Disengage AP
Select
-ALT-
-ALT3500
Set VOR/ Set ALT
GVOR OBS
BUG
Double-click to
Select mode,
select function &
click.
Rotate to set,
press & rotate to
fast set.
Recommended
selection for A/P
bug following
shown.