Download USER GUIDE - ACN Pacific

Network Setup
Network Setup
This page allows you to change the WAN (Wide Area Network) connection settings as well as the automatic failover function on the
NB16WV.
WAN Interface Types
You are able to select from three WAN interface types:
ADSL
Wireless WAN (3G USB Modem Dongle)
xDSL/Cable/Satellite)
Ethernet WAN (xDSL/Cable/Satellite
Each WAN connection type has a number of different configuration options which are listed below. Select the appropriate WAN
interface from the “WAN
WAN Interface”
down menu.
Interface drop-down
ADSL
The ADSL WAN interface now supports up to 8 VLAN tunnels for security and ease of network traffic management. VLAN tagging
can also be used for enhanced network management. Selecting the VLAN Summary button will display a summary of all VLANs
configured on the router.
WAN Type: You can select from the following WAN types:types:
Ethernet over ATM (RFC1483 bridged) with NAT
IP over ATM (RFC1483 routed)
PPP over Ethernet
PPP over ATM
RFC 1483 Bridged
Please note: Most users would select “PPP over Ethernet” for a normal xDSL broadband connection in Australia. For most
New Zealand users “PPP over ATM” would be the appropriate xDSL connection type to select.
NetComm NB16WV – ADSL2+ Wireless N Modem
Mo
Router with VoIP
21
YMLO-NB16WV
www.netcomm.com.au