Download Troubleshooting - Sharp Australia Support

mx7000_gb_trb.book
7 ページ
２００６年４月１３日　木曜日　午後１２時５０分
(11) Paper misfeed in the transport area
Turn roller rotating knob in
the direction of the arrow to
remove the misfed paper.
(13) Paper misfeed in tray 2 to tray 4 (side)
While holding the lever, open
the transport area cover.
(12) Paper misfeed in tray 1 to tray 4 (in the tray)
Pull out the tray gently until it
stops and remove the misfed
paper.
The misfeed may have
occurred inside the machine.
Check carefully and remove
it.
After removing the misfeeds,
be sure to close the transport
area cover.
(14) Paper misfeed in the output area
Be sure to check the following points before pulling the
tray out. If you pull the tray out without checking, you
may tear misfed paper and make it more difficult to
remove the pieces that remain in the machine.
Before removing the misfed paper in tray 1...
Check if there is a paper misfed in the transport area.
☞ (11) Paper misfeed in the transport area
Before removing the misfed paper in tray 2 to 4...
Open the right cover and check if there is a paper
misfed.
☞ (13) Paper misfeed in tray 2 to tray 4 (side)
Paper misfeed in the paper guide (tray 1, tray 2)
7