Download Contents Operating Instructions

00ALPINE.book Page 37 Wednesday, January 20, 2010 2:30 PM
Indication for USB Memory/Portable
audio player
• Mechanism error.
1 Press the  button and eject the CD.
If not ejecting, consult your Alpine dealer.
2 When the error indication remains after ejecting, press the 
button again.
If the error indication still does not turn off after pressing the 
button for a few times, consult your Alpine dealer.
• When “Error” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
(refer to “Initial System Start-Up” on page 8) and press  again.
If the disc still cannot be ejected, consult your Alpine dealer.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• Database error or decoder error.
– You can solve the problem by switching the source.
• Communication error or boot error, etc.
– You can solve the problem by reconnecting the USB memory/
Portable audio player or changing source.
• The Portable audio player is not verified.
– You can solve the problem by reconnecting the Portable audio
player.
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
Indication for CD Changer
• Protective circuit is activated due to high temperature.
– The indication will disappear when the temperature returns to
normal operating range.
• Malfunction in the CD Changer.
– Consult your Alpine dealer. Press the magazine eject button and
pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine dealer.
• Magazine ejection not possible.
– Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• Abnormal current is run to the USB connector device.
– You can solve the problem by switching the source.
• A USB device/Portable audio player that is not supported by the unit
is connected.
– Connect a USB device/Portable audio player that is supported by
the unit.
• A USB Memory/Portable audio player is not connected.
– Make sure the USB Memory device/Portable audio player is
correctly connected and the cable is not excessively bent.
• No song (file) is stored in the USB Memory/Portable audio player.
– Connect the USB Memory device/Portable audio player after
storing songs (files).
• A disc is left inside the CD Changer.
– Press the eject button to activate the eject function. When the CD
Changer finishes the eject function, insert an empty CD magazine
into the CD Changer to receive the disc left inside the CD
Changer.
• A sampling rate/bit rate not supported by the unit is used.
– Use a sampling rate/bit rate that is supported by the unit.
• No magazine is loaded into the CD Changer.
– Insert a magazine.
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
• No indicated disc.
– Choose another disc.
37-EN
ALPINE CDA-117E 68-14470Z54-B (EN)