Download Installation and Operating Instructions

2.5
Technical specifications
Model JPF-A/TP
DN125
DN150
DN200
100 (440)
150 (660)
200 (880)
3 (20)
3 (20)
3 (20)
Minimum operating pressure in psi (kPa)
Maximum operating pressure in psi (kPa)
22 (150)
150 (1000)
22 (150)
150 (1000)
22 (150)
150 (1000)
nominal pressure In psi (kPa)
150 (1000)
150 (1000)
150 (1000)
0.5 – 1.5
(8 – 25)
0.5 – 1.5
(8 – 25)
0.5 – 1.5
(8 – 25)
Back flush time in minutes approx.
4
6
8
Standard mesh size** in mm (inch)
0.1 (0.004)
0.1 (0.004)
0.1 (0.004)
Operating temperature max. in °C (°F)
30 (86)
30 (86)
30 (86)
Maximum ambient temperature in °C (°F)
30 (86)
30 (86)
30 (86)
5"
6"
8"
Electrical connection in V/Hz
120 / 60
120 / 60
120 / 60
Maximum rated power in W
25
25
25
NEMA 12
NEMA 12
NEMA 12
95
145
200
Maximum water flow rate* in m³/h (gpm)
Pressure loss after backwashing in psi (kPa)
Back flush Volume Stream in l/s (gpm)
Pipe connection
Protection class with closed control cover
(only control box)
Weight complete in kg
Tab 3: Technical specifications
*Information on water flow applies to drinking water. If the water contains excessive impurities, the
maximum water flow may be less, depending on the mesh sizing. In that case, a larger dimension
must be selected.
**The standard mesh size is 0.1 mm (0.004 inch). The mesh is made of stainless steel. Mesh
sizing of 0.03 / 0.32 and 0.5 mm (0.001 / 0.01 and 0.02 inch) are also available for technical
purposes.
creation date: 6/12/2006
amendment date: 6/14/2007
release date:
version: 2007/06
Operating Instructions: JPF-A/TP DN125-DN200 GB CDN
8-24
JUDO Wasseraufbereitung GmbH
Postfach 380 • 71351 WINNENDEN • GERMANY
Phone ++49 7195 692-0 • Fax ++49 7195 692-177
e-mail: [email protected]
Changes in the interest of the technical progress reserve!