Download INSTALLATION MANUAL

4.0 SUPPLIED DOCUMENTATION
 Condensed installation and user manual;
 Report of factory meter settings;
 Certificate of calibration data.
5.0 UNPACKING & INSPECTION
 This product has been thoroughly inspected and tested before shipment and is ready for operation;
 After carefully unpacking the meter, inspect for shipping damage before attempting to install. If any indication of mechanical damage
is found, immediately contact the responsible transportation service and your local Netafim™ representative.
6.0 SYSTEM DESCRIPTION & MEASUREMENT METHOD
 The Octave™ measurement method is based on an ultrasonic, transit-time, dual-beam sensor which determines the length of time
it takes an ultrasonic sound wave to travel the distance between the two sensors located on the meter’s body. The two sensors
function as both the sender and the receiver, each one alternating these functions so that the ultrasonic wave travels both with and
against the direction of the flow. Since the ultrasonic wave travels slower against the flow than with the flow, the time difference of
two waves traveling with and against the flow leads to determining the velocity of the water;
 The Octave™ ultrasonic flow meter is a battery-powered precision flow meter designed for linear, bidirectional flow measurement
of water;
 Flow measurement values can be transferred through the standard digital or analog output;
 The Octave™ can be set up for a wide range of applications.
7.0 MECHANICAL DATA
Maximum Working Pressure
16 bar
Liquid Temperature
0.1 up to 50°C
Precision Class
ISO 4064 rev.2005, Accuracy class 2
Configuration
Compact - The display is built in to the unit
Power Source
2 D size Li-battery - 10 years life time
Environmental Protection
IP 68, Ambient operation temperature: -25°C up to +55°C
Display Units
Multi line 9 digit LC display (Flow rate and volume units are programmable)
Volume Display Options
1. Net (Forward less reverse)
2. Forward only
3. Forward and reverse alternating
Outputs (optional)
4 - 20mA (powered loop)
Dual digital pulses process (open collector)
Dry Contact
Encoder output
Coupling Threads (only 2")
BSP, NPSM
Connections
Flanges according to ISO, BS 10 and ANSI 150
Severity Levels
Environmental class C, mechanical class M1
Electromagnetic environment class EI
Pressure Loss
∆P 16
08 8331 6500 | [email protected] | www.netafim.com.au
3