Download Installation Manual

SMA Solar Technology AG
Slot for SD Card
10 Slot for SD Card
The SD card is used to read in files, for instance, if after consulting the SMA Service Line you need to
perform a firmware update.
SMA Solar Technology AG will send you a file with the firmware update by e-mail or on an SD card,
or will make the file available in the download area at www.SMA.de/en.
For a description of the firmware update, see the download area at www.SMA.de/en.
Properties of the SD card
Use an SD card that is FAT16 or FAT32 formatted and has a maximum storage capacity
of 2 GB.
Use the SD card exclusively for this inverter. Do not save any multimedia files or other
unsuitable files on the SD card.
Installation Manual
SB25_30TLST_21-IA-IEN121110
69