Download eCOG1X User Manual - Glyn High
Transcript
eCOG1X User Manual 12.4 Version 0.1 Baud Rates The following tables list possible values for the baud rate divisor register for various standard baud rates. These are only examples, other values may be used if desired. Clock source set to HIGH_PLL high reference crystal 8.0 MHz high PLL multiplier set to 12 => 96 MHz divider tap select set to 13 => divide by 23 = 8 prescaler set to divide by 1 => DUART input clock = 12.0 MHz. Baud rate duart*.*_baud Actual Baud rate % error 1200 624 1200.0 0.0% 2400 311 2403.8 0.16% 3600 207 3605.8 0.16% 4800 155 4807.7 0.16% 7200 103 7211.5 0.16% 9600 77 9615.4 0.16% 19200 38 19230.8 0.16% 38400 19 37500.0 2.3% 57600 12 57692.3 0.16% 115200 6 107142.9 7.0% Table 38: DUART baud rates from HIGH_PLL Clock source set to LOW_PLL low reference crystal 32.768 kHz low PLL multiplier set to 150 => 4.9152 MHz divider tap select set to 14 => divide by 22 = 4 prescaler set to divide by 1 => DUART input clock = 1.2288 MHz. Baud rate duart*.*_baud Actual Baud rate % error 1200 63 1200 0.0% 2400 31 2400 0.0% 3600 20 3657.1 1.6% 4800 15 4800 0.0% 7200 10 6981.8 3.1% 9600 7 9600 0.0% 19200 3 19200 0.0% 38400 1 38400 0.0% Table 39: DUART baud rates from LOW_PLL 20 November 2006 Cyan Technology Ltd Page 12-3
Related documents
eCOG1X User Manual V2
eCOG1X Low Cost Development Kit User Manual
PUM IMAPCAR2 Video I/F Board
eCOG1X Low Cost Development Kit User Manual
Samsung RTS2BS User manual
Windows CE 4.2 for the eTOP Workstations
eCOG1k Development Kit User Manual
eCOG1k Evaluation Kit User Manual
off-the-shelf embedded-network connectivity
Glacier Bay QK053 Installation Guide
Windows CE 4.2 for the eTOP Workstations
NCO SE AA 039 INSTALACION DE CONCRETO