Download User Manual
Transcript
EN 6.5 MAINTENANCE AND USE MANUAL ASSEMBLING THE BIT The euclide plaster drill is supplied without the drill bit assembled and the rubber mat without holes. Bit assembly varies according to the type of precision chuck. Pincer locking system (follow the instructions in section 6.5.1, especially Fig.2). Fixed locking system (follow the instructions in section 6.5.2, especially Fig.6). When assembling the bit make sure that the plug is disconnected from the mains socket. Follow the instructions below carefully. 6.5.1 Pincer lock system Fig. 1: Remove the rubber mat (9); lower the mobile support top (5) until the bit-holding chuck is completely free. lide euc 5 9 Figure 1 12 15 13 Figure 126 of 176 Fig. 2: Lock the chuck shaft (16) with the n°10 wrench (13) and release the chuck lock (15) with the n°14 wrench (12). 16 2 eu clid e