Download exacqVision User Manual

IP Camera Recording
1
2
3
4
5
6
7
The IP Camera Recording page allows you to enable IP cameras to record video, configure the recording resolution, and
configure the images per second (IPS) recording rate. The following features are available on the IP Cameras page:
1.
2.
3.
4.
5.
6.
7.
The Camera Input column is always 1 for single-channel devices, or incremented for multi-channel devices.
The Camera Name column shows the assigned name of the camera.
The Video Detected column indicates whether the camera is connected and sending a video signal to the
system. If so, a green “YES” is shown.
The Record Enabled column contains check boxes that allow you to enable or disable recording from that
camera. By default, the check box is selected if a signal is detected; however, you can manually disable recording
on a camera that is connected and sending a signal to the system.
The Record Resolution column contains drop-down lists with resolutions supported on each camera.
The Record IPS column contains sliders allow you to change the number of images recorded from each camera
every second. The available IPS settings can vary between cameras.
Click Apply to activate any changes.
+1.317.845.5710
+5255.56080817
+44.1438.310163
+31.485.324.347
www.exacq.com
20
USA (Corporate Headquarters)
Mexico
United Kingdom
Europe