Download User Guide - Cyberbajt

CAMBIUM NETWORKS
Preparing for configuration
This section describes the checks to be performed before proceeding with unit configuration.
SAFETY PRECAUTIONS
All national and local safety standards must be followed while configuring the units.
Warning
Ensure that personnel are not exposed to unsafe levels of RF energy. The units start to radiate as
soon as they are powered up. Respect the safety standards defined in Compliance with safety
standards on page 273, in particular the minimum separation distances.
Observe the following guidelines:
•
Never work in front of the antenna when the AP is powered.
•
Always power down the power supply before connecting or disconnecting the Ethernet cable
from the module.
REGULATORY COMPLIANCE
All applicable radio regulations must be followed while configuring the units and aligning the
antennas. For more information, see Compliance with radio regulations on page 278.
69