Download QAD 2007 User Guide Volume 9: Manager Functions

System Interface
User Function Maintenance
Set up user menus and function keys in User Function Maintenance. Each
selection on the user menu should have a different function key reference,
from 13 to 40, and a zero or blank sequence number. The function key
reference must be 13 or greater, even if your keyboard supports fewer
function keys or you plan to access selections through the User Menu.
Note To set up function keys, terminals must be compatible with the
Progress protermcap file.
Fig. 4.5
User Function
Maintenance
(36.4.11)
Modifying Labels
The system dynamically reads the label master table to determine the
appropriate labels to display on screens and reports. For the system to
display labels from the label master, Translate Frames must be Yes in
Label Control (36.4.17.24). Otherwise, screens and reports display field
labels statically from the source code.
You can modify how labels display in Label Master Maintenance
(36.4.17.1). You may want to modify labels in order to meet specific
company needs or to improve definitions of non-English labels.
Fig. 4.6
Label Master
Maintenance
(36.4.17.1)
69