Download EVY8740AA ................................................ ...........
Transcript
10 www.electrolux.com and fan continue to operate). For this feature to operate, the cooking time must be longer than 30 minutes or you must use the clock functions (Duration, End, Time delay). This feature does not operate with the grill functions. – When the appliance is off, you can use the heat to keep food warm. The clock / residual heat display shows the re- maining temperature, and the bars show the temperature as it decreases. • Cooking with the lamp off to deactivate the Touch lamp during cooking. • Deactivating the display - If necessary, you can fully deactivate the appliance. Touch and at the same time until the display goes out. This step also activates the appliance. 7. CLOCK FUNCTIONS SYMBOL FUNCTION DESCRIPTION TIME OF DAY To examine the time of day. For changing the time of day refer to 'Setting and changing the time'. DURATION To set how long the appliance operates. END To set when the appliance deactivates. You can use the Duration and End functions at the same time (Time delay), if the appliance is to be activated and deactivated automatically later. 7.1 Count Up Timer Use the Count Up Timer to monitor how long the appliance operates. It is on immediately when the appliance starts to heat. Reset the Count Up Timer: touch and at the same time until the display shows "00:00" and the Count Up Timer starts to count up again. 4. Touch 5. Use or DURATION. 6. You cannot use the Count Up Timer when Duration or End is set. 7.2 Setting the DURATION 1. Activate the appliance and set an oven function and temperature. 2. Touch again and again until the . flashes in the display shows display. 3. Use or DURATION. to set the minutes for 7. to confirm. to set the hours for If you touch or while you set the DURATION, the appliance switches to the setting of the END function. When the set time ends, an acoustic signal sounds for two minutes. and time setting flash in the display. The appliance deactivates. Touch a sensor field or open the oven door to stop the acoustic signal. Deactivate the appliance. 7.3 Setting the END 1. Activate the appliance and set an oven function and temperature. 2. Touch again and again until the display shows . flashes in the display.