1
Download Contact the Matrix Fitness Customer Service
Transcript
G2-S30 LAT PULL Required Tools. QTY PART # SKETCH DESCRIPTION NOTES 01 3mm ALLEN WRENCH 01 4mm ALLEN WRENCH 01 5mm ALLEN WRENCH 01 6mm ALLEN WRENCH 01 8mm ALLEN WRENCH 01 10mm ALLEN WRENCH 01 PHILLIPS SCREWDRIVER 01 8mm OPEN-ENDED WRENCH 01 17mm OPEN-END WRENCH 01 GUIDE ROD LUBRICATION (ENCLOSED WITH PRODUCT) LIGHTLY GREASE Contact the Matrix Fitness Customer Service Department if you encounter any troubleshooting issues or missing hardware: TOLL FREE 866.693.4863 Phone 920.648.6100 Rev.01 G2-S30 Lat Pull Step 1 STEP 1 Upholstry Detail B26 Phone 920.648.6100 Rev.01 Item Description B26 Screw Sketch Qty 4 G2-S30 Lat Pull Step 2 STEP 2 Item Description B27 Screw (M8 X 30L) Flat Washer (M5) 2 4 K05 Knurled Belt Securing Insert 1 K07 Rubber Stack Cushions 2 K12 E-Clipper (E-15) L13 L14 Lock Washer (M5) Screw, Oval-Hex Socket (M5 X 16L) 4 4 4 F48 Weight Stack Detail Sketch Guide Sleeve K12 Knurled Belt Securing Insert L14 L13 F48 B27 AL1 K05 Guide Rod Screw Top Weight 10 Selector Pin 10 25 40 55 70 85 100 115 130 145 160 175 190 205 220 235 250 265 280 295 K07 Phone 920.648.6100 Rev.01 Qty G2-S30 Lat Pull Step 3 STEP 3 Belt Routing Detail Item Description F02 F09 F12 F14 F48 Belt Screw Belt Fixer Lock Washer Flat Washer Sketch Qty 1 4 2 4 4 Attachment Plate F12 Kevlar Belt Flat Washer F09 F14 Lock Washer F48 Screw F02 Phone 920.648.6100 Rev.01 G2-S30 Lat Pull Step 4 STEP 4 Accessory Detail Item Description B27 B33 B45 B51 Q06 Q07 Screw Water Bottle Holder Screw Internal Tooth Lock Washer Rubber Shield Spacer Rubber Tip Weight Shield Bolt Sketch 2 1 6 6 4 4 AB1 B33 B27 Upper Cover B51 B45 Towel / Water Bottle Holder Q06 Q07 Weight Shield Phone 920.648.6100 Rev.01 Qty
