Download User Manual

Picture 2-89
To record waveforms, follow these steps:
1. Press the UTILITY button to enter “Utility menu”.
2. Press the “Next Page” option button to enter the third page of
“Utility menu”.
3. Press the “Record” button to enter “Waveform Record Menu”.
4. Press the “Mode” option button to select “Record”.
5. Press the “Source” option button to select the input signal channel.
6. Select “Interval” option, turn the “Univeral” knob to adjust time interval
between record frames.
7. Select “End Frame”, select the “Universal” knob to adjust the max record frame.
8. Press “
”in “Operate”option to record waveform.
Play Back: Play back current record waveforms or saved record waveforms.
Table 2-61 Waveform play back function menu 1:
Option
Mode
Operate
Setting
Play Back
（Run）
（Stop）
Instruction
Set the Play Back function menu.
Press to start playback playing.
Press to stop playing.
Page 1/2
Set circular play mode.
Set single time play mode.
Set time interval between frames.
Enter the second page of Play Back menu.
Play Mode
Interval
Next Page
102