Transcript
Lexan® FMR Polycarbonate Windshield Z2430 and Z2432 for F800S Z2431 for F800St Read these instructions carefully and thoroughly before beginning work. CONTENTS OF KITS Item Description 1 Windscreen Tools Required: T25 Torx Driver Qty. 1 INSTALLATION 1. Remove the three stock screws and washers. (T25 Torx Driver) 2. Remove the stock windscreen. 3. Hold the ZTechnik windscreen in place and starting at the center location, re-install stock washers and screws. Figure 1. 4. Tighten all fasteners firmly. Figure 1. MAINTENANCE To clean the screen, wash with a clean soft cloth, plenty of warm water and, if necessary, a non-abrasive soap such as dishwashing liquid. Flannel or soft chamois make good cleaning cloths. ZTechnik PO Box 158 Maywood, IL 60153-0158 USA 708-343-0400 / Fax: 708-343-0625 / www.Z Technik.com / e mail: info@Z Technik.com ©2007 National Cycle, Inc. Page 1 of 1 10-118531-000
