Download GLITE 3.2 USER GUIDE

https://wms104.cern.ch:9000/yabp72aERhofLA6W2-LrJw
have been successfully retrieved and stored in the directory:
/tmp/doe_yabp72aERhofLA6W2-LrJw
================================================================================
The default location for storing the outputs (normally /tmp) is defined in the UI configuration, but it is possible
to specify in which directory to save the output using the --dir <path name> option.
Note: the output of a job will be removed from the WMS machine after a certain period of time. The length
of this period may vary depending on the configuration of the WMS, but the currently suggested time is 10 days,
so users should always try to retrieve their jobs within one week after job completion (to have a safe margin).
Example 6.3.2.4
(Retrieving logging information about submitted jobs)
The complete state history of a job is stored (until it is purged) in the Logging & Bookkeeping service and can
be retrieved using the command:
glite-wms-job-logging-info <jobID>
This functionality is especially useful in the analysis of job failures, although the information provided usually
is difficult to interpret by end users themselves.
The argument of this command is a list of one or more job identifiers. The -i and -o options work as in the
previous commands.
The following is the typical sequence of events for a successful job:
$ glite-wms-job-logging-info https://wms221.cern.ch:9000/-geMUQcs8X3Qp7XNCtHokw
**********************************************************************
LOGGING INFORMATION:
Printing info for the Job : https://wms221.cern.ch:9000/-geMUQcs8X3Qp7XNCtHokw
--Event: RegJob
- Source
- Timestamp
--Event: RegJob
- Source
- Timestamp
--Event: Accepted
- Source
- Timestamp
--Event: EnQueued
- Result
CERN-LCG-GDEIS-722398
=
=
NetworkServer
Wed Mar 16 22:01:42 2011 CET
=
=
NetworkServer
Wed Mar 16 22:01:43 2011 CET
=
=
NetworkServer
Wed Mar 16 22:01:44 2011 CET
=
START
Manuals Series
Page 69