Download Alpha - User Manual _107b__ENG

Installation
This chapter describes the installation of the Alpha duplicator. If you are in doubt of
what to do, please contact your local dealer or IG-Alliance
3.3 Installation and safety instructions
The system should be used in a closed room with a temperature of 15°C-30°C and
humidity of 15% - 85% none condensing. Set the Alpha on a horizontal and stable
surface. Around the Alpha duplicator must be 20 cm free space for guaranteeing
fast intervention on the power switch and good ventilation. Do not switch off the
Alpha duplicator while running. Wait about 15 seconds after powering down before
switching on again.
3.4 Installation of the system
3.4.1 Identifying the parts
This illustration shows the Alpha, its buttons, LED’s, input /output and reject bin and
other components. An ink-jet CD/DVD printer is inside the unit. You must pay
attention to the information how to install the system.
. 1
Fig. 1 a – Front view
12