Download Machine Controller MP2200 USER'S MANUAL
Transcript
3.2 Sample Program 1: Manual Operation (2) H01 Drawing The H01 child drawing turns ON the Servo, resets alarms, and sets common parameters. Main Program Processing of Common Axis Setting ########## Processing of common axis settings ########## ########## Motion command detection ########## Axis 1 motion command 0 detection Axis 1 motion command 0 Axis 2 motion command 0 detection Axis 2 motion command 0 ########## Servo ON ########## Axis 1 Servo ON Servo ON PB Axis 1 SVC_RDY Axis 1 SV_ON Axis 2 SVC_RDY Axis 2 SV_ON 3 Axis 2 Servo ON Servo ON PB ########## Alarm reset ########## Axis 1 alarm reset Alarm reset PB Axis 1 ALM_RST Axis 2 alarm reset Alarm reset PB Axis 2 ALM_RST ########## Speed unit and acceleration speed unit selection ########## Bits 0 to 3: Speed unit selection (0: Reference unit/s2 ; 1: Reference unit/min2 ; 2: % Bits 4 to 7: Acceleration speed unit selection (0: Reference unit/s2 ; 1: ms) Axis 1 function setting 1 (units) Axis 1, function setting 1 workpiece Axis 1, function setting 1 Axis 2 function setting 1 (units) Axis 2, function setting 1 workpiece Axis 2, function setting 1 3-41