Download OPERATING INSTRUCTIONS

AQUA
03/06
Cycle time
AROMA
01/07
Aroma
>
> manuel
> 1 .. . 5 (min)
Defines the aquaCool and aroma cycle time (spray-
Not available in this system.
ing time + spraying interval). If „manual“ is selected,
by pressing the aquaCool- or Aroma plus button a
spray cycle can be triggered.
AROMA
02/07
Aromastatus reset
Factory setting: manuel
> Reset: press `-` for 2s
AQUA
04/06
aquaCool st
start testcycle
Not available in this system.
> Start: press `+` for 2s
AROMA
03/07
Cycle time
>
Starts the aquaCool test (1 cycle).
AQUA
05/06
Not available in this system.
aquaCool endurance test
>
> on
> off
Starts the aquaCool endurance test. After having
selected and stored the “on” setting, you must
leave the service menu and start a tanning session.
Attention!
aquaCool
will
continue
to
spray
permanently during a whole tanning session.
AROMA
04/07
Aroma cabin automatic
>
Factory setting: off
Not available in this system.
AQUA
06/06
aquaCool initialization
> Start: press `+` for 2s
AROMA
05/07
Aroma cycles per hour
Starts the aquaCool initialization process. A
>
spraying cycle of 90 seconds is started to
bleed the system before commissioning, after a
repair operation or after a canister replacement.
Not available in this system.
O p e r a t i n g I n s t r u c t i o n s | megaSun pureEnergy 5.0
31