Download SG100K3 Grid-Connected Inverter Installation Manual

7 Mechanical Installation
Installation Manual
Fig. 7-2 Move the unpacked inverter with wooden baseboard
y
Use a forklift truck to move the inverter without wooden baseboard, see Fig. 7-3.
Fig. 7-3 Move the inverter by a forklift truck
y
Remove the front and rear base cover;
y
Move the inverter to its final installation position through the guild rail, see Fig. 7-4 A;
y
Move the inverter by lifting channel steel, see Fig. 7-4 B.
The center of the lifting hook should be vertical to the inverter center. Before formal
lifting, try to lift the inverter experimentally. Follow the crane safety operation and do not
lift the inverter slant.
y Spread lubrication on the guild rail surface to reduce the resistance.
y When a crane is used, make sure the lifting angle is no less than 70°. Pay
22