Download User's Manual - Q-TECH

3.3 Programming Mode
Table 3.18 Continued
LED monitor
shows:
(item No.)
Item displayed
A
Max. temperature of heat
sink
A
Terminal I/O signal status
(displayed with the
ON/OFF of LED
segments)
A
Terminal input signal
status (in hexadecimal
format)
A
Terminal output
signal status (in
hexadecimal format)
A
No. of consecutive
occurrences
This is the number of times the same alarm occurs
consecutively.
A
Overlapping alarm 1
Simultaneously occurring alarm codes (1)
("" is displayed if no alarms have occurred.)
A
Overlapping alarm 2
Simultaneously occurring alarm codes (2)
("" is displayed if no alarms have occurred.)
A
Terminal I/O signal status
under communications
control
(displayed with the
ON/OFF of LED
segments)
A
Error sub code
Shows the ON/OFF status of the digital I/O terminals.
Refer to "„ Displaying control I/O signal terminals" in
Section 3.3.5 "Checking I/O signal status" for details.
Shows the ON/OFF status of the digital I/O terminals
under RS485 communications control. Refer to
"„ Displaying control I/O signal terminals under
communications control" in Section 3.3.5 "Checking I/O
signal status" for details.
Secondary error code for the alarm.
When the same alarm occurs repeatedly in succession, the alarm information for the first and
last occurrences will be preserved and the information for other occurrences inbetween will
be discarded. Only the number of consecutive occurrences will be updated.
3.3.8
Data copying information
-- Menu #7 "Data Copying" --
Menu #7 "Data Copying" is used to read function code data out of an inverter for which function codes
are already set up and then to write such function code data altogether into another inverter, or to
verify the function code data stored in the keypad with the one registered in the inverter.
3-31
OPERATION USING THE KEYPAD
A
Terminal output signal
status under
communications control
(in hexadecimal format)
Shows the temperature of the heat sink.
Unit: ºC
Chap. 3
A
Terminal input signal
status under
communications control
(in hexadecimal format)
Description