Download EGT User Manual

EGT User Manual
Specification:
- Sensor type: K-type thermocouple, ungrounded
- Measuring range: 0-1100oC
- Measuring accuracy: ± 3°C (0-1000°C, tamb = 25ºC)
- Operating temperature range: -40 - +80°C
- Cold-junction compensation range: -40 - +80°C
- Operating voltage: 7-16Vdc
- Overvoltage protection: 39V 15A max (600W) 10/1000μs
- Polarity protection: -400Vdc max continuous
- Internal fuse protection: 2 x F2A
Features:
- Peak value memory and reset
- Adjustable warning light 0-1100°C (5°C step)
- Automatic display brightness control
EGT User Manual v1.0
©VPV-Motorracing 2013
Picture 1
Front panel
Picture 2
Backside connections
Connector and wiring:
Pin
Cable colour
Signal
1
2
3
4
RED
GREEN
BLACK
WHITE
+12V
K+
GND/K-
Table 1
Connector pins
Picture 3 Assembly hole dimensioning
Switch ON
Peak
Value
Display
Menu structure
NORMAL
OPERATION
t<2s
t>2s
Peak
Value
Reset
t<2s
t>2s
NOTE!
Never press switch when
gauge is starting! It will go
into calibration mode and
needs factory calibration
after that!
EGT User Manual v1.0
Warning
t<2s
level
display t>2s
0.4s Switch OFF
+5ºC Warning
level
increase
©VPV-Motorracing 2013