Download Operating Instructions Air Conditioner

ENGLISH
TO SET THE TIMER
TO SELECT FAN SPEED
(5 OPTIONS)
• To turn ON or OFF the unit at a preset time.
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
AIR SWING
Select ON or
OFF timer.
TO ADJUST
AIRFLOW DIRECTION
(5 OPTIONS)
• To cancel ON or OFF timer, press
press
• Keeps the room ventilated.
• If AUTO is set, the louvers swing left/right and
up/down automatically.
• In heat mode, the air blows horizontally for a while,
then starts to blow downwards and the airflow louvers
start to swing left/right after the temperature rises.
+8/10˚C
HEAT
Confirm.
or
then
.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control Preparation at back
cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
.
resumed) by pressing
TO USE
MAINTENANCE
HEATING
• Maintain indoor temperature at 8/10°C.
Fan switches to high fan speed
automatically.
• This operation overwrite the operation
mode and could be cancelled by pressing
10˚C
8˚C
.
• Defrost operation at outdoor unit will
result in sudden cold air from indoor unit.
Eliminate cold air with heat mode.
TO ENJOY QUIET
ENVIRONMENT
OPTIONAL SETTINGS
Press and hold for 5 seconds to dim or
restore the unit’s indicator brightness.
• This operation reduces airflow noise.
TO ACHIEVE
TEMPERATURE
QUICKLY
Set the time.
(
)
Press and hold for approximately 10 seconds
to show temperature setting in °C or °F.
Press and hold for approximately 5 seconds
to show 12-hour (am/pm) or 24-hour time
indication.
•
and
can be activated in all modes
and can be cancelled by pressing the respective
button again.
Press to restore the remote control’s default
setting.
+8/10˚C
HEAT
•
,
and
activated at the same time.
operations can not be
+8/10˚C
HEAT
•
operation can be activated independently.
,
Not used in normal operations.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
5