Download Operating instructions RES-406 - About
Transcript
Controller functions 10 Controller functions See also section 8.6 "Wiring diagram (standard)" on page 14. 10.1 Indicators and controls Manufactured as of February 2006 1 2 ALARM HEAT OUTPUT AUTOCAL 4 ROPEX Tel:+49(0)7142-7776-0 Made in Germany 12 13 14 15 16 17 18 Temperature controller 5 6 7 8 9 10 11 RESISTRON RES- 406 PROFIBUS 3 24V SUPPLY BUS POWER OK µC POWER OK DATA EXCHANGE ALARM (red LED) Lights up or blinks to indicate an alarm. HEAT (yellow LED) Lit during heating phase. OUTPUT (green LED) Indicates pulses in measurement mode. In control mode, luminous intensity is proportional to heating current. AUTOCAL (yellow LED) Remains lit for duration of AUTOCAL process. 24V SUPPLY (green LED) Lit if external 24VDC power supply is present. BUS PWR OK Lit if internal 5VDC power (green LED) supply for Profibus interface is OK. µC PWR OK (green LED) Lit if internal 5VDC power supply for microcontroller is OK. DATA EXC (green LED) Remains lit while Profibus data is exchanged with master. RES-406 Page 21