Download User Manual

Transcript
Section 3 - Configuration
Autoconfiguration
My IPv6 Connection is: Select Autoconfiguration (SLAAC/DHCPv6) from the dropdown menu.
IPv6 DNS Settings: Select either Obtain DNS server address automatically or
Use the following IPv6 DNS servers.
Primary/Secondary IPv6 Enter the primary and secondary DNS server addresses.
DNS Server:
Enable DHCP-PD: Check this box to enable DHCP prefix delegation.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-Local Displays the router’s LAN IPv6 Link-Local Address.
Address:
Enable automatic IPv6 Check to enable the Autoconfiguration feature.
address assignment:
Enable Automatic Check to enable prefix delegation for routers in your LAN.
DHCP-PD in LAN:
Autoconfiguration Type: Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or
Stateful DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your
Start: local computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your
End: local computers.
Router Advertisement Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
Click Save Settings.
D-Link DIR-818LW User Manual
64