Transcript
Package Contents STEP 1 Hardware Setup A Plug in the WL559E repeater to the power outlet. B Switch on the power outlet. C Connect the ethernet cable to the WL559E repeater and STEP 2 Connecting the WL559E to the Wireless Network A Launch the internet browser from your computer. You will be redirected to the WL559E repeater’s user interface. (If in any case it doesn’t, type http://10.0.10.254 in your internet browser and then hit Enter. STEP 3 Place the WL559E Repeater Between Wireless Router and the Blind Spot The WL559E repeater will connect to the wireless network and will redirect to the user interface with the following status. STEP 4 Connect Your Wireless Devices to the Repeater A Connect your wireless devices to the WL559E repeater’s wireless network. to the computer. WL559 Wireless N Repeater Resource CD ! Important: Please turn-off / disable any wireless client on your computer before you proceed with Step 1 B Choose SSID (Wireless Network Name) from the list and click to connect. A Disconnect the ethernet cable from the computer and the WL559E repeater. B Place the WL559E repeater between the wireless router Throughput vs Wireless Coverage and the blind spot. Easy Start Guide WL559E | Wall-Plugged 300Mbps Wifi Repeater Easy Start Guide Ethernet Cable (RJ45) C Input the Wireless Password for the network and click on Apply. Assess and identify the areas in your house where the wireless reception from your main router is weak or no wireless signal. Place the WL559E repeater between the wireless router and the point of weak wireless signal. It is ideal for the WL559E repeater to be placed in a location, where it can receive good wireless signal from the wireless router. SMART LED Indicator (Determines the signal strength of the wireless router) Wireless reception and throughput may vary according to the number of wireless clients that are in use at the same time, other nearby wireless devices, structure type, building materials and other interference present.
