Download Aztech WL559E Product Datasheet
Transcript
Wall-Plugged Wi-Fi Repeater WL559E Aztech WL559E Wall-Plugged 300Mbps Wi-Fi Repeater About the product: Aztech 300Mbps Wall-plugged Wireless-N Repeater, WL559E enables users to gain Wi-Fi access freely environment by picking up existing wireless signals from router or access point and bouncing off to other areas that experience unstable or inconsistent wireless coverage. The sleek and elegant design seamlessly integrates into any home environment without the sight of messy wiring or cabling. Wi-Fi Repeater in Any Wall Outlet at Home or Office Aztech WL559E is the latest Wi-Fi repeater model that follows WL556E, the first Wi-Fi repeater designed with an in-built power adapter. Unlike Wi-Fi repeaters that require an external power supply adapter, the innovative wall-plugged design empowers users to plug it directly into any available power outlet. Robust 300Mbps Wireless-N Speed 300Mbps Wireless-N speed ensures faster wireless connection between devices. MIMO technology provides better overall coverage against weak Wi-Fi or Wi-Fi dead spots and enables users to stream multiple HD content wirelessly from Internet-enabled TVs, game consoles and media players without lag. Dynamic RSSI for Intelligent Guidance to the Best Possible Wi-Fi Spot! Received Signal Strength Indicators (RSSI) are LED indicators that intelligently determine the wireless signal strength received from the router. By reading the number of illuminated LED indicators, users can assess if the area that Aztech WL559E is plugged into is the recommended location for best Wi-Fi coverage. For example: A single illuminated LED indicates that the area where Aztech WL559E is plugged into has weak Wi-Fi coverage. The user should then plug the Wi-Fi repeater to another available wall outlet. Two LED indicators show recommended Wi-Fi coverage while three LED indicators suggest excellent coverage. Wi-Fi Protected Setup (WPS) Button for Fast and Easy Installation Users can automatically add Aztech WL559E to their existing network by pressing the WPS button located at the top of the product. Simply press the WPS button for approximately 5 seconds and within a span of 2 minutes, press the router’s WPS button for 2 seconds. An intuitive web interface allows a step-by-step guide in the set-up process. .. .. Key Benefits: Repeats wireless signal for improved Wi-Fi coverage Plug directly into wall outlet Easy and hassle-free set-up Intelligent RSSI indicators for best Wi-Fi spot Product views: Wi-Fi Protected Setup button for simple pairing Top view Reset Ethernet port Bottom view WEAK RECOMMENDED EXCELLENT Maximum wireless signal rate derived from IEEE Standard 802.11g and draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. www.aztech.com Head Office AZTECH TECHNOLOGIES PTE LTD. Hong Kong Office AZTECH SYSTEMS (H.K) LTD. 31 Ubi Road 1, Aztech Building Rooms 2-10, 3rd Floor, Core Building 1 Singapore 408694 No. 1Science Park East Avenue Tel: (65) 6594 2288 Fax: (65) 6749 1198 HongKong Science Park Shatin,New Territories, Hong Kong Tel: (852) 2757 1177 Fax: (852) 2753 0578 Malaysia Office China Office USA Office Unit 719 Block A Kelana Business Centre No. 97, Jalan SS7/2 Kelana Jaya 47301 Petaling Jaya Selangor Darul Ehsan, Malaysia Tel: (60)(3) 7804-8450 Fax: (60)(3) 7804-8457 Jiu Jiang Shui Village, Chang Ping Town Dong Guan City, Guang Dong Province, China. Tel: (86)(769) 8393-6688 Fax: (86) (769) 8393-1138 4005 Clipper Court, Fremont Kreuzberger Ring 22, 65205 Wiesbaden CA 94538, U.S.A. Germany. Tel: (1)(510) 683-9800 Fax: (1)(510) 683-9803 Tel: (49)(0) 611-45020-0 Fax: (49)(0) 611-45020-100 AZ-TECHNOLOGY SDN BHD. AZTECH COMMUNICATION DEVICE (DG) LTD. AZTECH LABS, Inc. Germany Office AZTECH SYSTEMS GmBH. Repeat Your Wireless Coverage Internet Modem Fiber or ADSL/Cable Router Tablet iPhone®/Android® ROOM 1 Extended wireless range Notebook Wireless range from router LED Colour Behaviour 1 1. GREEN *LED should be ON if WL559E is connected to Router and RSSI value is equal to HIGH. *LED should be OFF while WL559E is booting up. *LED should be OFF while WL559E is doing WPS authentication. 2. GREEN *LED should be ON if WL559E is connected to Router and RSSI value is greater than or equal to MID. *LED should be OFF while WL559E is booting up. *LED should be OFF while WL559E is doing WPS authentication 3. GREEN *LED should be blinking if WL559E is NOT connected to any Router. *LED should be ON if WL559E is connected to Router and RSSI value is greater than or equal to LOW. *LED should be OFF while WL559E is booting up. *LED should be OFF while WL559E is doing WPS authentication. AMBER *LED should be ON during boot up. After fully bootup, LED will OFF. *LED should be blinking for 2 mins once WPS button is pressed. *LED should stop blinking and ON for 5 secs when WPS authentication is successful. Then LED should be OFF. *LED should be OFF if WL559E is connected to Router. 2 3 ROOM 2 Specifications Protocol/Standards Network Support Wireless IEEE802.11b/g/n Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64 Wireless Frequency Band Security Support Hardware Platform Support Power Requirements External Connectors Dimension Weight Temperature Humidity IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11b: CCK, QPSK, BPSK Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13) Wireless: 64/128-bit WEP, WPA, WPA2 Key Chipset: Ralink RT3352 Network Processor + WLAN Controller SPI FlashRom: 4M Byte (Default) DDR2 DRAM: 64M Byte OS Independent with TCP/IP protocol installed Supply voltage range: 100VAC – 240VAC (50/60 Hz) 1 x RJ45 for 10/100Base-T LAN Power Consumption : Less than 4W 1 x Factory Default Reset Button 1 x WPS button Max Current : 0.12A 2 x Internal antennas 105(L) x 58 (W) x 42 (H) mm 160 g Operating : 0 o to 40 o Celsius(32 o to 104 o Fahrenheit) Non-Operating :-25 o to 70 o Celsius(-13 o to 158 o Fahrenheit) Operating : 30% to 90% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing) www.aztech.com Head Office AZTECH TECHNOLOGIES PTE LTD. Hong Kong Office AZTECH SYSTEMS (H.K) LTD. 31 Ubi Road 1, Aztech Building Rooms 2-10, 3rd Floor, Core Building 1 Singapore 408694 No. 1Science Park East Avenue Tel: (65) 6594 2288 Fax: (65) 6749 1198 HongKong Science Park Shatin,New Territories, Hong Kong Tel: (852) 2757 1177 Fax: (852) 2753 0578 Malaysia Office China Office USA Office Unit 719 Block A Kelana Business Centre No. 97, Jalan SS7/2 Kelana Jaya 47301 Petaling Jaya Selangor Darul Ehsan, Malaysia Tel: (60)(3) 7804-8450 Fax: (60)(3) 7804-8457 Jiu Jiang Shui Village, Chang Ping Town Dong Guan City, Guang Dong Province, China. Tel: (86)(769) 8393-6688 Fax: (86) (769) 8393-1138 4005 Clipper Court, Fremont Kreuzberger Ring 22, 65205 Wiesbaden CA 94538, U.S.A. Germany. Tel: (1)(510) 683-9800 Fax: (1)(510) 683-9803 Tel: (49)(0) 611-45020-0 Fax: (49)(0) 611-45020-100 AZ-TECHNOLOGY SDN BHD. AZTECH COMMUNICATION DEVICE (DG) LTD. AZTECH LABS, Inc. Germany Office AZTECH SYSTEMS GmBH.