Download Installation Instructions and User Guide

Product Features
1. Temperature Indication
Water temperature indication display. The display
will only light up once the STOP/START button is
pressed, then the temperature display will start to
count up, depending on the position of control 3.
Note: The digital display is an indication of
the water temperature inside the unit, not the
outlet water temperature. Any slight up or down
fluctuations on the display during use are normal.
1
eco
2
2. Power Control
Adjustable power settings:
Cold ( ), Medium (eco ) and High ( ).
3. Temperature Control
Adjustable temperature control.
4. Push Button STOP/START Button
3
Temperature Control Device
4
The Temperature Control Device will activate
when the temperature is set too high and the
water inside the water heater gets too hot. The
Temperature Control Device will switch off the
power to the heating elements. Once the unit
cools down to a safe temperature the elements
will come on again and reheat the water within
the water heater and the whole cycle will repeat
itself until the temperature is manually reduced.
Phased Shut Down - Joy Only
When the shower is turned off, water will continue
to flow for a short period of time while the heater
cools down to approximately 30 on the display
before automatically turning off.
4
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.