Download Operators Manual

NeuroTrac™ Multi-TENS Operation Manual
Care, Maintenance,
Accessories and Disposal
WARNING! Only medically approved accessories should be used!
CONTROL UNIT
*
*
*
Wipe the surface once a week with a damp cloth or antiseptic wipe.
Do not use cleaning sprays or alcohol based cleaning solutions.
Control unit disposal: please return to Verity Medical LTD or to the
appointed distributor.
ACCESSORIES
Battery:
*
To change the battery, open the battery door on the rear of the control
unit by pressing down on the raised rib pattern just below the belt clip.
Lift the battery out of the compartment. This is very easy and can be
done by the user.
*
Check periodically for any discharge from the battery.
*
Remove battery completely from unit if not in use for any
extended period of time (typically one week).
*
Low battery indicator of 6.9 volts shown on LCD display, when
flashing change battery for a new one.
*
Preferably use a PP3 alkaline battery.
*
Battery disposal: please return to the supplier from whom you’ve
purchased it.
Lead Wires:
*
The lead wires should be handled carefully and never stretched, as this
can cause the stimulation to function below normal standards or not at all.
*
Examine lead wires before each treatment for loose connections or
damage.
*
Avoid stretching and twisting the lead wires.
*
Store the lead wires carefully after each use.
*
Lead wires Disposal: please return to the supplier from whom you’ve
purchased them.
Self-Adhesive Electrodes:
*
Check the short connectors have not become separated from the
electrodes.
*
Replace electrodes onto plastic film after use. If they drop onto the
floor debris will adhere to conductive gel rendering the electrodes
ineffective.
24