Download User's Guide

Pulse Owner's Manual
1.
To enter Plan Mode, press the MODE button twice so the mode
indicator is above PLAN. Once in Plan Mode, the computer will
display the following information (figure 9):
a.
Plan Depth. The computer will display the plan depths in
3m/10 ft., increments starting at 9m/30 ft.
b.
No-decompression limit (NDL). This is the maximum
amount of time you can stay at the given depth before requiring mandatory decompression stops. If you set Mix 1 to
22% or higher and you exceed your Maximum operating
Depth (MOD), three dashes (- - -) will be displayed.
c.
Nitrox Mix 1. You need to make sure the FO2 accurately
matches the actual breathing gas in your cylinder. (See
“Dive Settings Mode” on page 22).
d.
Safety Factor (SF)
e.
Water type
27