Download Mooveo P6 Quick User Guide

Table: Remove or Replace
Underneath the table are two latches with
red triggers, which must be pulled away
from the wall.
When you replace the table, don’t forget to
re-engage the both of the two latches
shown above. This is important because
they prevent the table from tipping up if you
lean on one corner.
Also without these latches, if you stop
abruptly, the table will be flung towards the
driver.
The table can be
lowered to make bed
support.
The leg is bent by
pressing a button on
the side of the
“knee”
A white secondary support leg prevents the bed
tipping. It is added by clicking it into the socket
as shown. Some people leave it in this position
permanently.
24/05/2010 ver 1.3
17
© MotorHolme Ltd