Download Operating Instructions Type S020

Type S020
Table of Contents
1. About the Operating Instructions........................................5
1.1. Symbols used........................................................................................5
2. Intended use.................................................................................................6
3. Basic safety information................................................................6
4. General information............................................................................7
4.1. Manufacturer's address and international contacts..........7
4.2. Warranty conditions............................................................................7
4.3. Information on the Internet.............................................................7
5. Description....................................................................................................8
6.5.4. K factors (in pulse/litre) for T fittings and welding sockets used with a 8041 or a 8045 with
clamp connection.................................................................14
6.5.5. K factors (in pulse/litre) for T fittings used with
a 8020, 8024, 8025 or 8026...........................................14
6.5.6. K factors (in pulse/litre) for saddles.................................17
6.5.7. K factors (in pulse/l) of the fusion spigots and
welding sockets with radius for measuring
devices with a G2'' nut........................................................18
6.5.8. K factors (in pulse/litre) for screw-ons............................20
7. Installation and commissioning............................................ 21
7.1. Safety instructions........................................................................... 21
6. Technical data............................................................................................8
7.2. Installation onto the pipe.............................................................. 22
6.1. Conditions of use.................................................................................8
6.2. Dimensions.............................................................................................8
7.2.1. Recommandations for installing the S020 fitting
on the pipe.............................................................................22
6.3. Diameters available............................................................................8
7.2.2. Installing a T fitting...............................................................24
6.4. Materials...................................................................................................9
7.2.3. Installing saddles..................................................................25
6.5. K factors................................................................................................. 10
7.2.4. Installing a welding socket with radius, for measuring devices with a G2'' nut...........................................26
6.5.1. Terms of reference...............................................................10
6.5.2. Calculation of K factors (in pulse/litre) for
saddles, fusion spigots, welding sockets with
radius or screw-ons.............................................................10
6.5.3. K factors (in pulse/litre) for T fittings used with
a 8041 or 8045 with a G2'' nut........................................11
7.2.5. Installing a welding socket, for measuring
devices with a clamp connection.....................................26
7.2.6. Installing a fusion spigot (PE, PP or PVDF)...................29
7.2.7. Installing a screw-on in plastic (PP, PVC, PE)..............29
English
3