Download V2IU 5300S User Guide, V7.2.2 - Support

User Guide V2IU 5300-S Series Converged Network Appliance
Setting
Description
100baseT-HD
100Mbits per second using half duplex
transmission
100baseT-FD
100Mbits per second using full duplex
transmission
Autonegotiate
The 5300-S autonegotiates link rate and
duplex with the directly attached device.
5. Press Submit.
Configuring the Network
Use network settings to configure the default gateway address, and the
primary and secondary DNS servers.
Packets destined for IP addresses not known to the 5300-S are forwarded to the
Default Gateway for handling. For the 5300-S the Default Gateway MUST be
the next hop router attached to Port 1 (the Subscriber interface).
The primary DNS server is used by the 5300-S to resolve domain names to IP
addresses. The secondary DNS server is used in the event the primary DNS
server is unreachable.
To configure network settings:
1. In the Network page, move to the Network Settings section.
4-8