Download Operating instructions for condenser dryers

Installation and connection
External condensed water
outlet
Notes
When drying is in progress,
condensed water is pumped into the
condensed water container through
the drain hose which is located at the
back of the dryer.
Arranging the drain hose
 Do not pull on the drain hose
and do not stretch it or allow it to
become kinked.
This could damage the hose.
There will be a small amount of residual
water left in the drain hose. Have a
container ready to collect this.
The condensed water can also be
drained away via the drain hose so that
the condensed water container does
not have to be emptied.
Drain hose length: 1.50 m
Maximum delivery head: 1.50 m
Maximum drain hose length: 4.00 m
The following optional accessories
are available:
– an extension hose,
– a non-return valve kit for connection
to an external water outlet. The kit
includes an extension hose.
 Pull the drain hose off its connection.
 Allow any residual water to run into
the container.
 Unwind the hose and pull it carefully
out of the holders.
41