Download Nav4plus User Guide - ICS Electronics Ltd

Transcript
NAV4plus User Guide
When you switch on the NAV4plus for the first time it will accept all
categories of messages from all NAVTEX stations on the currently
selected frequency.
It is likely that you will wish to reduce the amount of information
printed so that only NAVTEX messages applicable for your area are
printed.
For 518kHz operation you have two options :
1. Programme out any stations and categories that you do not want
to receive so that they are ignored. Any of the NAVTEX
message categories can be ignored, if required
2. Link a GPS or integrated instrument system (with GPS) and let
the NAV4plus select NAVTEX stations automatically. The
NAV4plus contains an internal database of 518kHz station
locations.
For 490kHz operation station selection can only be made manually –
there is no internal database of 490kHz station locations. If you wish
to reduce the amount of information printed then programme any
stations and categories that you do not want to receive so that they
are ignored. Any of the NAVTEX message categories can be
ignored, if required.
Message category definitions and a world-wide list of
NAVTEX stations and their identification codes can be
found near the end of this user guide.
8