Download Operating instructions Powerstocc Master Control

4 Connecting the computer to the inverter
— Administrator rights for installation
4
Connecting the computer to
the inverter
PMC2 must be able to establish a network connection
between the computer it is installed on and the inverter
of the photovoltaic plant. If there are several inverters in
the plant, there must be a network connection to all of
them. You can find all the necessary information in the
assembly and operation manual of the inverter.
5
Installation
On some versions of Windows you need administrator
rights to install PMC2.
1. Install Microsoft .NET Framework 3.5 if you have
not already done so.
5. Accept the license agreement and click Next.
2. Run the installation program for PMC2.
3. Select a language and click OK.
Note: This is only the language for the installation
program. You can change the language of the
Powerstocc Master Control V2.0 user interface
after you have installed it.
6. Select the installation folder for PMC2 and
click Next.
4. Click Next.
7. Select the start menu folder for PMC2. If you do not
want the setup program to make an entry in the
start menu, select the corresponding checkbox.
Click Next.
Operating instructions Powerstocc Master Control V2.0
5