Download OPERATING INSTRUCTIONS RAUTOOL G1B

www.pipe2000.co.uk
Compression Sleeve Jointing Procedure
1.
Cut PEX pipe to length at
2.
right angles.
4.
Expand the pipe using the
5.
Slide the compression sleeve
3.
The compression sleeve
on to the pipe making sure
must not be within the ex-
the inside taper faces the
panding area. Insert the ex-
pipe end.
pander inside the PEX pipe.
Release the pressure by
6.
Insert fitting into the pipe.
foot pump. Do not use ex-
pressing the pressure release
After a short time the fitting
cessive force. Stop pumping
lever.
sits tight in the pipe
when resistance is felt.
( m emory effect ) .
Leave pipe expanded for 60
seconds.
Page 3
www.pipe2000.co.uk